 white.png){kind=small}
Maintenance Details
| Date | 28 Jun 2020 |
|---|---|
| Start Time | 10:30:01 |
| End Time | 11:30:01 |
| Nature Of Maintenance | Mechanical |
| Equipment | TAPPING SEC. CRANE NO. 2 |
| Type of Maintenance | Scheduled Maintenance |
| Details | TAPPING SECTION E.O.T. CRANE 2 It's H.T. MOTOR IS BURN. ELECTRICAL DEP. WORKING ON IT. LT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing.greaaing is done. 2. check the gearbox oil level, leakage, and fill if required.SMALL AMOUNT OF GRESE FILLING IS DONE. 3. check all fasteners and mounting bolts.IT IS OK. 4. check frame welding conditions.IT IS OK. 5. check end traveling gears condition and do the greasing.IT IS OK. GREASING IS DONE. CT. 1. check coupling, shaft, and pedestal bearing condition and do the greasing.IT IS OK. 2. check the gearbox oil level, leakage, and fill if required.GREASE FILLING IS DONE. 3. check all fasteners and mounting bolts.IT IS OK. 4. check frame welding conditions.IT IS OK. 5. check end traveling gears condition and do the greasing.IT IS OK. GREASEING IS DONE. HT. ITS MOTOR IS BURN. ELET. DEP. WORKING ON IT. 1. check rope drum, hook, rope condition. greasing of rope.IT IS OK. GREASING IS DONE. 2. check the thruster drum condition and its brake tightness. 3. check all fasteners and mounting bolts.IT IS OK. 4. check frame welding conditions. IT IS OK. |
| Remark | H.T. MOTOR IS BURN. ELECT. DEP. WORKKING ON IT. |
| Furnace | Other |
| Status | Completed |