Maintenance Details

Back

Date03 Jun 2020
Start Time14:30:01
End Time15:30:01
Nature Of MaintenanceMechanical
EquipmentTAPPING SEC. CRANE NO. 2
Type of MaintenanceScheduled Maintenance
DetailsTAPPING SECTION E.O.T. CRANE 2

LT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. it's ok. We tight foundation bolt of motor and gearbox.
2. check the gearbox oil level, leakage, and fill if required.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions.its ok.
5. check end traveling gears condition and do the greasing.greasing is done.

CT.
1. check coupling, shaft, and pedestal bearing condition and do the greasing. When we check it. We found that it's gear is damage.so we change it.
2. check the gearbox oil level, leakage, and fill if required. small leakage found but we fill it by grease.
3. check all fasteners and mounting bolts.It is ok.
4. check frame welding conditions.it is ok.
5. check end traveling gears condition and do the greasing.greasing is done.

HT.
1. check rope drum, hook, rope condition. greasing of rope.it is ok.
2. check the thruster drum condition and its brake tightness.it is ok.
3. check all fasteners and mounting bolts.it is ok.
4. check frame welding conditions. It is ok.
Remark
FurnaceOther
StatusCompleted