 white.png){kind=small}
Maintenance Details
| Date | 23 May 2020 |
|---|---|
| Start Time | 07:30:01 |
| End Time | 12:00:01 |
| Nature Of Maintenance | Mechanical |
| Equipment | WASHING PLANT |
| Type of Maintenance | Scheduled Maintenance |
| Details | TILTING HOPPER 1. greasing all bushes.greasing is done. 2.hydraulic pump and motor coupling.it is ok. 3. checking the hydraulic oil level and if not then fill.it is ok. 4. check hopper welding sections. It is ok. CONVEYOR NO 1 1. greasing of bearings.greasing is done. 2. lubrication of rollers and check conditions.it is ok. 3. check belt status ( if damaged than inform and change) and also check tightness, speed.it is ok.belt is not good we need to change it. 4. gearbox oil level check and if not then fill as per requirement.grease fill is done. 5. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok. 6. check the drum condition.it is ok. 7. check mounting frame welding condition.it is ok. 8. check rollers condition and if not good then change. CRUSHER crusher is out due to small size material. 1. check the crusher foundation. 2. check V belts condition. 3. do greasing. 4. check spring rod condition and gap between plates. VIBRATOR 1. check the spring condition.it is ok. 2. check V belts condition.it is ok. 3. check vibrations if not good then adjust.it is ok. 4. check the frame welding condition.greasing is done.in bearings. ROLLER 1. check roller speed.it is ok. 2.greasing of bearings.greasing is done. 3.gearbox oil level check and if not then fill as per requirement.it is ok. 4. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok. 5. check the drum condition. 6. check the mounting frame welding condition.it is ok. DISCHARGE CONVEYOR 1. greasing of bearings.Greasing is done. 2. lubrication of rollers and check conditions.it is ok. 3. check belt status ( if damaged than inform and change) and also check tightness, speed.it is ok. 4. gearbox oil level check and if not then fill as per requirement.it is ok. Fill some grease. 5. check coupling and key ( if damaged than inform and change) and do the greasing.it is ok. 6. check the drum condition. 7. check mounting frame welding condition.it is ok. 8. check rollers condition and if not good then change. |
| Remark | |
| Furnace | Other |
| Status | Completed |